ZyXEL Communications N4100 User Manual

Chapter 27 Licensing
N4100 User’s Guide
208
Note: If the N4100 is registered already, this screen is read-only. Use the Service
screen to upgrade a service and update your service subscription status.
Figure 95 ADVANCED > LICENSING > Registration
The following table describes the fields in this screen.
Table 52 ADVANCED > LICENSING > Registration
LABEL DESCRIPTION
New
myZyXEL.com
account
If you haven’t created an account at myZyXEL.com, select this option
and configure the following fields to create an account and register
your N4100.
Existing
myZyXEL.com
account
If you already have an account at myZyXEL.com, select this option
and enter your user name and password in the fields below to register
your N4100.
User Name Enter a user name for your myZyXEL.com account. The name should
be from six to 20 alphanumeric characters (and the underscore).
Spaces are not allowed.
Password Enter a password of between six and 20 alphanumeric characters (and
the underscore). Spaces are not allowed.
Confirm
Password
Enter the password again for confirmation.
E-Mail Address Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Country Select your country from the drop-down box list.
Apply Click this button to save your changes back to the N4100.

ZyXEL Communications N4100 Specifications

General

Number of users	100 user(s)
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	100 Mbit/s
Indoor range	35 ~ 100 m
Outdoor range	100 ~ 300 m
Connectivity LEDs	Yes
Internal	No
Certification	FCC, CE, C-Tick, NCC, RoHS, WEEE
Security algorithms	802.1x RADIUS
Power requirements	100-240 VAC, 50/60 Hz, 0.5 A
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Weight	565 g
Dimensions (WxDxH)	222 x 146 x 152 mm