273D SYSTEMS, INC.
Module Transportation Cart
Used to remove the build module out of the printer and to
store a build module if you have multiple build modules.
X
X
Sieving Station (optional):
The sieving station allows the user to electronically
sift and separate material from the overow bins and
separate it into the waste and the usable material that
can be fed into the feeds to build parts.
Z
Y
Y
Chiller
The chiller cools and circulates cooling liquid used to keep
the laser parts at a set temperature. The cooling liquid is
composed of a mixture of 50% tap water and 50% distilled
water. Optishield is added to this mixture to prevent
corrosion. For more information, please refer to the Chiller
User Guide.
Y
To Next Page
Loading...
Need help?
General
