9ARD000014-600 A 11
About This User Manual
Any security measures described in this document, for example, for user access,
password security, network security, firewalls, virus protection, etc., represent
possible steps that a user of an 800xA System may want to consider based on a
risk assessment for a particular application and installation. This risk assessment,
as well as the proper implementation, configuration, installation, operation,
administration, and maintenance of all relevant security related equipment,
software, and procedures, are the responsibility of the user of the 800xA System.
This user manual describes the integration of CI873 interface for EtherNet/IP and
DeviceNet communication in AC 800M, Common Industrial Protocol (CIP)
architecture, and integration of CIP in Control Builder and AC 800M.
The main areas covered in user manual are:
• CI873 EtherNet/IP Hardware Library (CI873EthernetIPHWLib).
• Device Import Wizard, used to import the Electronic Da
ta Sheet (EDS) files
into Control Builder.
Intended User
This user manual is intended for engineers who are planning and designing
EtherNet/IP and DeviceNet networks. The reader is expected to be familiar with the
Control Builder programming tool and the AC 800M products under the 800xA
system.
To Next Page
Loading...
