ABB AC 800M

Section 6 Linking Device LD 800DN User Accounts on LD 800DN
9ARD000014-600 A 203
User Accounts on LD 800DN
The LD 800DN contains two user accounts on initial power up, namely the
Administrator Mode and the Normal Mode.
Administrator Mode
The default password is DNmemmap. Replace this with a password that
conforms with your organization's security policy at the first possible
opportunity. Failure to replace the default password makes the system susceptible
to unauthorized access.Refer to the Password Security topic in System 800xA
Administration and Security (3BSE037410*) for recommendations on
establishing a password security scheme.
In Administrator mode, the Admin user has full access to the file system through
FTP. This enables to access areas of the file system that are restricted or inaccessible
for Normal mode users.
The account login details are:
• U
ser Name = Admin
• Default Password =
DNmemmap
The default password can be changed by changing the password files. The
Administrator can access the password files to add or remove users or change
passwords. Refer
Password Files on page 207 for more details.
Normal Mode
The Normal mode is recommended for normal user operation. In this mode, the
Web pages and other settings are protected from unauthorized modification. In
normal mode the FTP services are only enabled if there is a subdirectory called
\user. When a normal user connects via FTP, this directory is the root directory.
Only the files and subdirectories in this directory can be accessed.