Linear Network Section 1 Introduction
24 9ARD000014-600 A
Linear Network
Products with EtherNet/IP embedded switch technology have two ports to
connect to a linear or DLR network in a single subnet.
You cannot use these ports as two Network Interface Cards (NICs) connected to
two different subnets.
Figure 3. Linear Network Topology
Embedded switch technology is designed to enable end devices to form linear and
ring network topologies.
A linear network is a collection of devices that are daisy-chai
ned together. The
EtherNet/IP embedded switch technology lets you implement this topology at the
device level. No additional switches are required.
200-AENTR is a device that can be connected linear.
To Next Page
Loading...
