Section 3 Device Import Wizard I/O Settings
9ARD000014-600 A 73
I/O Settings
The EDS file import - I/O Settings window is used to assign conversion rules for
the input and output area. Based on the conversion rule assigned for the input and
output area, the input and output channels are created.
In certain cases, the assembly definition in the respective EDS file(s), provides the
necessary information regarding creation of channels. In such cases the input and
output channels may get configured prior to entering the I/O Settings window.
The following I/O Settings window is for a DeviceNet device non-modular EDS
file. Figure 28 is an example of the I/O Settings window for a modular DeviceNet
device.
To Next Page
Loading...
