Adding S200 I/O Modules Section 4 Configuration
146 9ARD000014-600 A
Adding S200 I/O Modules
This section describes about inserting of S200 adapter, S200 I/O modules,
configuring of S200 adapter and S200 I/O modules.
Follow these steps to insert a new S200 adapter:
1. From the hardware library, right click and select Insert Library. Select
S20
0IoCI873HWLib and Insert as shown in Figure 58.
Figure 58. Insert Library
2. To insert the CI873 see Adding CI873 on page 107.
3. Connect the S200 Hardware library to the
connected libraries.
To Next Page
Loading...
