Section 4 Configuration Configuring EtherNet/IP Device
9ARD000014-600 A 135
Configuring EtherNet/IP Device
For configuring the EtherNet/IP Device Unit, in the hardware tree double-click
EtherNet/IP device unit or right-click and select Editor from the context menu.
This opens the Hardware Editor, as shown in Figure 56.
The following example shows the Settings tab of EtherNet/IP device with Class 1
Exclusive Owner connection. This is based on the EtherNet/IP EDS file selected
during converting the EDS file into hardware unit types through Device Import
Wizard. The configuration parameters of an EtherNet/IP device appear in the
Hardware Editor. It is directly taken from the EDS file provided by the device
vendor. For details on device configuration parameters from the EDS file, refer
Section 3, Device Import Wizard.
To Next Page
Loading...
