EasyManua.ls Logo

ABB AC 800M

ABB AC 800M
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9ARD000014-600 A 173
Section 6 Linking Device LD 800DN
Overview
The LD 800DN, EtherNet/IP to DeviceNet linking device, provides full DeviceNet
master functionality, allowing connectivity to 63 DeviceNet slaves. It also supports
EtherNet/IP adapter class functionality with CIP Message Routing.
LD 800DN can be used to:
Connect EtherNet/IP to DeviceNet (bridge functionality).
Connect information or control level networks to device level networks for
programming, configuration, control or data collection.
Features
The features of the LD 800DN linking device are:
Baud rates of 125, 250, and 500 Kbps are supported.
Automatic Address Recovery to replace a faulty slave device with a
replacement device, at the same MAC ID.
Configuration Recovery can be enabled for slave devices. Thus, a newly
replaced device slave can be configured to the same settings of the device, it
replaces.
Transfers 496 bytes Input and 492 bytes Output.
An FTP server functionality, which provides easy file management using
standard FTP clients.
A flexible HTTP server functionality (Web server).
Firmware updates using the RS232 port and BridgeWay Configuration Tool.

Table of Contents

Other manuals for ABB AC 800M

Related product manuals