Device Identification Parameters Section 4 Configuration
124 9ARD000014-600 A
Device Identification Parameters
These are parameters showing the identity of the slave device. They appear as Read
Only and cannot be modified. They are:
• Vendor ID
• Product Type
• Product Code
• Major Revision
• Minor Revision
Electronic Key Parameters
A linking device identifies a DeviceNet slave device by its electronic key
parameters, before communicating with it. With these set of parameters, it is
possible for user to specify the DeviceNet device identity criteria that the linking
device should use before communicating with them.
Set the four Electronic Key Parameters based on their descriptions given in
Table 18. All parameters are user editable. Upon modification of any of the
parameters, the connection between LD 800DN and the DeviceNet slaves
configured under it, stops momentarily.
To Next Page
Loading...
