Section 4 Configuration EtherNet/IP Device with Tag Support
9ARD000014-600 A 141
EtherNet/IP Device with Tag Support
EtherNet/IP device with tag support, enables class 1 and class 3 connection. The tag
supported EtherNet/IP devices are, such as Allen Bradley Logix 500 series PLC.
It is possible to add the Logix 5000 series PLC under the CI873 module in the
hardware tree. Before adding a new Allen bradley Control Logix 5000 series PLC,
ensure that PLC specific hardware types is added in the Hardware Library by using
Device Import Wizard. For more information, refer Converting an EDS File to a
Hardware Unit Type.
Configuring Logix 5000 series PLC Unit
Given below is an example for configuring a Control Logix PLC unit.
For configuring a Control Logix PLC Unit, in the hardware tree double-click
Control Logix PLC unit or right-click and select Editor from the context menu.
This opens the Hardware Editor, as shown in Figure 57.
To Next Page
Loading...
