Configuring EtherNet/IP Device Section 4 Configuration
140 9ARD000014-600 A
Class
1
Exclusive
Owner
T2ORPI
Dint ms 10 500 Editable Requested Packet Interval in
milliseconds for T->O packets.
Upon modification, connection with
the Ethernet/IP device is re-
established.
Class
1
Exclusive
Owner
Enabled
Enum - - - Editable Class 1 connection is logical segment
that is connection point based.
The name of the connection is
derived from Connection Manager
section of EDS file by the EDS DIW.
Options are:
• Enabled - New connection will
be established and the data
starts updating on the
corresponding connection
channel.
• Disabled - Connection that is
already established, will be
closed.
(1) If the IP Address parameter is left blank, then it is evaluated from the EtherNet/IP device’s position in the hardware
tree along with the IP address of its CI873 parent unit. The first three octets are taken from the parent unit and last
octet from the hardware tree position.
Table 23. Settings for EtherNet/IP Device Unit (Continued)
Parameter Data Type Unit Min Max
Editable
/Read
Only
Description
To Next Page
Loading...
