ABB AC 800M

Section 4 Configuration Configuring Logix 5000 series PLC Unit
9ARD000014-600 A 145
Tag2
TagName
(Applicable
only for
Class 3)
String - - - Editable This parameter shows the tag defined
in the Allen Bradley PLC to which the
connection is established.
Tag2 Cycle
Time
(Applicable
only for
Class 3)
Dint ms 100 1000 Editable This is the scan cycle for tag 2.
Tag2 Data
Typ e
(Applicable
only for
Class 3)
Dint - 0 500 Editable This parameter determines the data
type of the tag defined in the Allen
Bradley PLC.
Tag3
Enabled
(Applicable
only for
Class 3)
Enum - - - Editable This parameter is used to enable or
disable the tag 3.
Tag3
TagName
(Applicable
only for
Class 3)
String - - - Editable This parameter shows the tag defined
in the Allen Bradley PLC to which the
connection is established.
Tag3 Cycle
Time
(Applicable
only for
Class 3)
Dint ms 100 1000 Editable This is the scan cycle for tag 3.
Table 24. Settings for Allen Bradley Control Logix PLC (Continued)
Parameter Data Type Unit Min Max
Editable
/Read
Only
Description