ABB AC 800M

Configuring Logix 5000 series PLC Unit Section 4 Configuration
144 9ARD000014-600 A
Class 3
T2ORPI
(Applicable
only for
Class 3)
Dint - - 500 Editable Requested Packet Interval in
milliseconds for T->O packets.
Tag1
Enabled
(Applicable
only for
Class 3)
Enum - - - Editable This parameter is used to enable or
disable the tag 1.
Tag1
TagName
(Applicable
only for
Class 3)
String - - 150 Editable This parameter shows the tag defined
in the Allen Bradley PLC to which the
connection is established.
Tag1Cycle
Time
(Applicable
only for
Class 3)
Dint ms 100 1000 Editable This is the scan cycle for tag 1.
Tag1Data
Ty p e
(Applicable
only for
Class 3)
Dint - 0 500 Editable This parameter determines the data
type of the tag defined in the Allen
Bradley PLC.
Tag2
Enabled
(Applicable
only for
Class 3)
Enum - - - Editable This parameter is used to enable or
disable the tag 2.
Table 24. Settings for Allen Bradley Control Logix PLC (Continued)
Parameter Data Type Unit Min Max
Editable
/Read
Only
Description