ABB AC 800M

Status Handling for DeviceNet Slaves Section 2 Functional Description
38 9ARD000014-600 A
26 0x04000000 Keeper
space
exceeded.
ADR not
configured
Warning - - Set if
ConfigRecovery is
enabled for device
and its
configuration is
not able to write to
LD 800DN’s
Keeper memory
due to lack of
Keeper Memory
25 0x02000000 Slave
Connection
Initialization
in progress
Warning - - Set when the
Connection
between

LD 800DN and
DeviceNet device
is in progress
24 0x01000000 ADR Error Warning Alarm High Set if an error
occurred during
auto device
replacement or
auto configuration
23 0x00800000 No
DeviceNet
Power
Warning Alarm High Set when there is
no Network power
detected on the
DeviceNet
network
22 0x00400000 CAN Bus
Off
Warning Alarm High Set when the CAN
Controller is in the
Bus-Off state
Table 6. Errors and Warnings of DeviceNet Device (Continued)
Bit Value Text Indication Alarm/Event Severity Description