ABB ACH580-31 - Connecting the Control Cables; Connection Diagram; Connection Procedure

16 N·m 
16 N·m 
30 N·m 
Connecting the control cables
￭
Connection diagram
See Default I/O connection diagram (page 137) for the default I/O connections of
the drive.
￭
Connection procedure
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
1. Stop the drive and do the steps in section Electrical safety
precautions (page 20) before you start the work.
110 Electrical installation – IEC