ABB ACH580-31 - Control Panel Door Mounting Kits; Control Panel Mounting Platform Cover (Option +J424); Remote Control Panel, Panel Bus

￭
Control panel door mounting kits
You can use a mounting platform to install the control panel on the cabinet door.
Mounting platforms for control panels are available as options from ABB. For more
information, see
Code (English)Manual
3AUA0000100140DPMP-01 mounting platform for control panels installation guide
3AUA0000136205DPMP-02/03 mounting platform for control panels installation guide
3AXD50000308484DPMP-04 and DPMP-05 mounting platform for control panels installation
guide
3AXD50000289561DPMP-06 / 07 mounting platform for control panels installation guide
￭
Control panel mounting platform cover (option +J424)
CDOM-01 control panel mounting platform cover can be used to cover the control
panel mounting platform when no control panel is on it. Power and fault indication
LEDs are visible on the cover.
￭
Remote control panel, panel bus
CDPI-01 communication adapter module can be used to connect the drive control
panel remotely to the drive, or to chain the control panel or a PC to several drives
on a panel bus. The panel bus can have maximum 16 ACH580-31 drives. For more
information, see CDPI-01/-02 panel bus adapters user's manual (3AXD50000009929
[English]).
This photo shows the CDPI-01 communication adapter module.
38 Operation principle