Control panel
To remove the control panel, press the retaining clip at the top (1a) and pull the
panel forward from the top edge (1b).
To install the control panel, put the bottom of the container in position (2a), press
the retaining clip at the top (2b) and push the control panel in at the top edge (2c).
For the use of the control panel, see the firmware manual and ACS-AP-I, -S, -W and
ACH-AP-H, -W Assistant control panels user's manual (3AUA0000085685 [English]).
Operation principle 37
To Next Page
Loading...
