￭
Package materials for options, accessories and spare parts
• Cardboard
• Kraft paper
• PP (straps)
• PE (foil, bubble wrap)
• Plywood, wood (only for heavy components).
Materials vary according to the item type, size and shape. Typical package consists
of a cardboard box with paper filling or bubble wrap. ESD-safe packing materials
are used for printed circuit boards and similar items.
￭
Materials of manuals
Printed product manuals are recyclable paper. Product manuals are available on
the Internet.
Disposal
The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit boards and large electrolytic
capacitors need selective treatment according to IEC 62635 guidelines. To aid
recycling, plastic parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must
follow international and local regulations.
Applicable standards
The drive complies with the following standards. The compliance with the European
Low Voltage Directive is verified according to standard EN 61800-5-1.
Safety of machinery. Electrical equipment of machines. Part 1: Gen-
eral requirements. Provisions for compliance:
EN 60204-1:2006 +
AI:2009 + AC:2010
The final assembler of the machine is responsible for installing
• emergency-stop device
• supply disconnecting device.
Degrees of protection provided by enclosures (IP code)IEC/EN 60529:1981
+A1:1999 + A2: 2013
Electromagnetic compatibility (EMC) – Limits for harmonic current
emissions (input current < 16 A per phase)
IEC 61000-3-2:2018,
EN 61000-3-2:2014
Technical data 203
To Next Page
Loading...
