Equipment6Medium voltage network1
Supply transformer7Neighboring network2
Static screen8Point of measurement3
Drive9Low voltage4
--Equipment (victim)5
2. An EMC plan for preventing disturbances is drawn up for the installation. A
template is available in Technical guide No. 3 EMC compliant installation and
configuration for a power drive system (3AFE61348280 [English]).
3. The motor and control cables are selected, and routed according to the
electrical planning guidelines of the drive. The EMC recommendations are
obeyed.
4. The drive is installed according to its installation instructions. The EMC
recommendations are obeyed.
WARNING!
A drive of category C4 is not intended to be used on a low-voltage public
network which supplies domestic premises. Radio frequency interference is
expected if the drive is used on such a network.
UL checklist
WARNING!
Operation of this drive requires detailed installation and operation
instructions provided in the hardware and software manuals. The manuals
are provided in electronic format in the drive package or on the Internet.
Keep the manuals with the drive at all times. Hard copies of the manuals can
be ordered through the manufacturer.
• Make sure that the drive type designation label includes the applicable marking.
Technical data 209
To Next Page
Loading...
