￭
Replacing the main cooling fan, frame R6
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
1. Stop the drive and do the steps in section Electrical safety
precautions (page 20) before you start the work.
2. Lever the fan assembly off the drive frame with for example a screwdriver and
pull out the fan assembly.
3. Pull the fan assembly down.
4. Disconnect the fan power supply wire from the drive.
5. Install the new fan in reverse order.
158 Maintenance
To Next Page
Loading...
