DescriptionTerm
Optional mounting platform for door mounting of control panelDPMP-EXT
Frequency converter for controlling AC motorsDrive
Embedded fieldbusEFB
Electromagnetic compatibilityEMC
BACnet/IP adapter moduleFBIP-21
Optional CANopen® adapter moduleFCAN
Optional ControlNet™ adapter moduleFCNA-01
Optional DeviceNet™ adapter moduleFDNA-01
Optional EtherCAT® adapter moduleFECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP
and PROFINET IO protocols, 2-port
FENA-21
Optional Ethernet POWERLINK adapter moduleFEPL-02
Optional LonWorks® adapter moduleFLON-01
Optional PROFIBUS DP® adapter moduleFPBA-01
Physical size of the drive or power moduleFrame, frame size
Insulated gate bipolar transistorIGBT
DC circuit between rectifier and inverterIntermediate circuit
Converts direct current and voltage to alternating current and
voltage.
Inverter
Rectifies three phase AC current to direct current for the intermediate
DC link of the drive
Line-side converter
A networking platformLonWorks®
Converts intermediate DC link current to AC current for the motorMotor-side converter
Remote monitoring toolNETA-21
With fieldbus protocols based on the Common Industrial Protocol
(CIPTM), such as DeviceNet and Ethernet/IP, denotes the control of
the drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC
Drive Profile. For more information, see www.odva.org.
Network control
In the drive control program, user-adjustable operation instruction
to the drive, or signal measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed
as an object. For example, variable, constant, or signal.
Parameter
Programmable logic controllerPLC
Positive temperature coefficientPTC
Converts alternating current and voltage to direct current and voltageRectifier
Safe torque off (IEC/EN 61800-5-2)STO
28 Introduction to the manual
To Next Page
Loading...
