14 Introduction to the manual
Related manuals
The related manuals are listed behind the front cover under List of related manuals.
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and
data via a network interface. It is Customer's sole responsibility to provide and
continuously ensure a secure connection between the product and Customer network
or any other network (as the case may be). Customer shall establish and maintain
any appropriate measures (such as but not limited to the installation of firewalls,
application of authentication measures, encryption of data, installation of anti-virus
programs, etc) to protect the product, the network, its system and the interface
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for
damages and/or losses related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
See also section User lock (page 100).
PID controller Proportional–integral–derivative controller
PLC Programmable logic controller
PMSM Permanent magnet synchronous motor
PM Permanent magnet
R0, R1,… Frame (size)
RCD Residual current device
Rectifier Converts alternating current and voltage to direct current and
voltage.
RFI Radio frequency interference
RO Relay output; interface for a digital output signal. Implemented
with a relay.
SIL Safety integrity level. See chapter Safe torque off function in the
drive hardware manual.
STO Safe torque off. See chapter Safe torque off function in the drive
hardware manual.
ACS180 FW.book Page 14 Tuesday, March 9, 2021 2:25 PM
To Next Page
Loading...
