ABB ACS180 User Manual

Fault tracing 331
8
Fault tracing
What this chapter contains
• Safety
• Indications
• Warning/fault history
• QR Code generation for mobile service application
• Warning messages
• Fault messages
If the warnings and faults cannot be identified and corrected using the information in
this chapter, contact an ABB service representative. If you use the Drive composer
PC tool, send the Support package created by the Drive composer to the ABB service
representative.
Warnings and faults are listed in separate tables. Each table is sorted by a
warning/fault code.
Safety
WARNING! Only qualified electricians are allowed to service the drive. Read
the instructions in chapter Safety instructions at the beginning of the hardware
manual of the drive before working on the drive.
ACS180 FW.book Page 331 Tuesday, March 9, 2021 2:25 PM

ABB ACS180 Specifications

General

Product Type	DC Drive
Number of Phases	1 or 3
IP Rating	IP20
Communication Interfaces	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Storage Temperature	-40 to +70 °C
Relative Humidity	5 to 95 % non-condensing
Altitude	Up to 1000 m