ABB ACS180 - Start and Stop the Drive; Change the Rotation Direction; Set the Speed or Frequency Reference

24 Start-up, ID run and use
Start and stop the drive
Change the rotation direction
Set the speed or frequency reference
1. Press the Start button to start the drive.
2. Press the Stop button to stop the drive.
1. On Home view, press Back button to get Options
menu.
2. In the Options menu, move to the rotation direction
item and press OK. Then use the arrow buttons to
change the rotation direction selection.
3. Press the OK button to change the rotation
direction.
1. On Home view, press Back button to get Options
menu.
2. In the Options menu, move to the speed or
frequency reference item and press OK.
3. Press the arrow buttons to edit the value.
4. Press the OK button to confirm the new value.
1
2
1
3
2
1
2
3
ACS180 FW.book Page 24 Tuesday, March 9, 2021 2:25 PM