160 Parameters
21.32 Speed comp stop
threshold
This parameter sets a speed threshold below which the
Speed compensated stop feature is disabled. In this
speed region, the speed compensated stop is not
attempted and the drive stops as it would, using the ramp
option.
10%
0…100% Speed threshold as a percent of the motor nominal speed. 1 = 1%
22
22 Speed reference
selection
Speed reference selection; motor potentiometer settings.
See the control chain diagrams on pages 378…382.
22.01 Speed ref unlimited Displays the output of the speed reference selection
block. See the control chain diagram on page 378.
This parameter is read-only.
0.00 rpm
-30000.00… 30000.00
rpm
Value of the selected speed reference. See par.
46.01
No. Name/Value Description Default
FbEq 16
ACS180 FW.book Page 160 Tuesday, March 9, 2021 2:25 PM
To Next Page
Loading...
