ABB ACS380 Series - Safety instructions; 10. Fieldbus control through a fieldbus adapter

Introduction to the manual 11
1
Introduction to the manual
Contents
• Applicability
• Safety instructions
• Target audience
• Purpose of the manual
• Contents of the manual
• Terms and abbreviations
• Related manuals
Applicability
The manual applies to the ACS380 machinery control program 1.7.1 or later.
To check the version of the control program, see parameter 07.05 Firmware version.
Safety instructions
Follow all safety instructions.
• Read the complete safety instructions in the Hardware manual of the drive before
you install, commission, or use the drive.
• Read the firmware function-specific warnings before changing parameter values.
Chapter Parameters lists the relevant parameters and related warnings.