ABB ACS380 Series - Safety

Fault tracing 345
8
Fault tracing
Contents
• Safety
• Indications
• Warning/fault history
• QR Code generation for mobile service application
• Warning messages
• Fault messages
If the warnings and faults cannot be identified and corrected using the information in
this chapter, contact an ABB service representative. If you use the Drive composer
PC tool, send the Support package created by the Drive composer to the ABB service
representative.
Warnings and faults are listed in separate tables. Each table is sorted by a
warning/fault code.
Safety
WARNING! Only qualified electricians are allowed to service the drive. Read
the instructions in chapter Safety instructions at the beginning of the hardware
manual of the drive before working on the drive.