ABB ACS380 Series - Programmable Relay Outputs; Fieldbus Control

60 Program features
 Programmable relay outputs
There is one relay output as standard. With the BREL-01 (relay output extension
module) option it is possible to get four more relay outputs. The signal indicated by
the output can be selected by parameters.
Parameters
Groups 15 I/O extension module, 10 Standard DI, RO.
 Fieldbus control
The drive can be connected to several different automation systems through its
fieldbus interfaces. See chapters Fieldbus control through the embedded fieldbus
interface (EFB) and Fieldbus control through a fieldbus adapter.
Parameters
Groups 50 Fieldbus adapter (FBA), 51 FBA A settings, 52 FBA A data in, 53 FBA A
data out and 58 Embedded fieldbus.