36 Control macros
Alternate macro
This macro provides an I/O configuration where one signal starts the motor in the
forward direction and another signal starts the motor in the reverse direction.
You can activate the macro from the Control macros view, or by setting parameter
96.04 Macro select to value Alternate.
The macro is optimized for the standard drive variant (ACS380-04xS) and configured
drive variant ACS380-04xC +L538. You can use it also with the base drive variant
(ACS380-04xN) but then you cannot use all the I/O available in the macro.
To Next Page
Loading...
