ABB ACS850 - Page 121

Parameters 121
08.07 Alarm logger3 Alarm logger 3. For possible causes and remedies, see
chapter Fault tracing on page 289. Can be reset by entering a
0.
-
08.08 Alarm logger4 Alarm logger 4. For possible causes and remedies, see
chapter Fault tracing on page 289. Can be reset by entering a
0.
-
No. Name/Value Description FbEq
Bit Name
0 Enc2 cable
1D2D comm
2 D2D buffer ol
3PS comm
4Restore
5 Curr meas calib
6 Autophasing
7 Earthfault
8 Autoreset
9 Motor nom value
10 D2D config
11 Stall
12 Load curve
13 Load curve conf
14 U/f curve conf
15 Speed meas
Bit Name
0 Option comm loss
1 Solution prog
2 Motor temp2
3 IGBT overload
4 IGBT temp
5 Cooling
6 Menu change
7 Temp meas fail
8 Mnt counter (common for maintenance counter alarms 2066…2071)
9 DC not charged
10 Speed tune fail
11 Start interlock
12 EFB comm
13...15 Reserved