ABB ACS850 - Page 159

Parameters 159
15.12 AO2 src min Defines the real value of the signal (selected by parameter
15.07 AO2 src) that corresponds to the minimum AO1 output
value (defined by parameter 15.10 AO2 out min). See
parameter 15.11 AO2 src max.
-32768.000 …
32768.000
Real signal value corresponding to minimum AO2 output
value.
1000 = 1
15.13 AO3 src Selects a drive signal to be connected to analogue output
AO3.
Speed rpm 01.01 Motor speed rpm (see page 103). 1073742081
Speed % 01.02 Motor speed % (see page 103). 1073742082
Frequency 01.03 Output frequency (see page 103). 1073742083
Current 01.04 Motor current (see page 103). 1073742084
Current % 01.05 Motor current % (see page 103). 1073742085
Torque 01.06 Motor torque (see page 103). 1073742086
Dc-voltage 01.07 Dc-voltage (see page 103). 1073742087
Power inu 01.22 Power inu out (see page 103). 1073742102
Power motor 01.23 Motor power (see page 103). 1073742103
SpRef unramp 03.03 SpeedRef unramp (see page 114). 1073742595
SpRef ramped 03.05 SpeedRef ramped (see page 114). 1073742597
SpRef used 03.06 SpeedRef used (see page 114). 1073742598
TorqRef used 03.14 Torq ref used (see page 115). 1073742606
Process act 04.03 Process act (see page 115). 1073742851
Proc PID out 04.05 Process PID out (see page 115). 1073742853
Pointer Value pointer setting (see Terms and abbreviations on page
102).
-
15.14 AO3 filt time Defines the filtering time constant for analogue output AO3.
See parameter 15.02 AO1 filt time.
0.000 … 30.000 s Filter time constant. 1000 = 1 s
15.15 AO3 out max Defines the maximum output value for analogue output AO3.
0.000 … 22.700 mA Maximum AO3 output value. 1000 = 1 mA
15.16 AO3 out min Defines the minimum output value for analogue output AO3.
0.000 … 22.700 mA Minimum AO3 output value. 1000 = 1 mA
No. Name/Value Description FbEq