ABB ACS850 - Page 317

Control through the embedded fieldbus interface 317
50.05 Fb ref2
modesel
Raw data
Torque
Speed
Defines the fieldbus reference REF2 scaling.
Selects also the fieldbus actual signal act2
when set to Torque or Speed.
ACTUAL VALUE ACT1 AND ACT 2 SELECTION (if 50.04 or 50.05 has value Raw data).
50.06 Fb act1 tr src Any Selects the source for fieldbus actual value
act1 when parameter 50.04 Fb ref1 modesel
is set to Raw data.
50.07 Fb act2 tr src Any Selects the source for fieldbus actual value
act2 when parameter 50.05 Fb ref2 modesel
is set to Raw data.
SYSTEM CONTROL INPUTS
16.07 Param save Save (restores to
Done)
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
Parameter Setting for
fieldbus control
Function/Information