Maintenance
Contents of this chapter
This chapter contains maintenance instructions.
Maintenance intervals
The tables below show the maintenance tasks which can be done by the end user. The
complete maintenance schedule is available on the Internet (www.abb.com/drivesservices).
For more information, consult your local ABB Service representative
(www.abb.com/searchchannels).
The maintenance and component replacement intervals are based on the assumption that
the equipment is operated within the specified ratings and ambient conditions. ABB
recommends annual drive inspections to ensure the highest reliability and optimum
performance.
Note: Long term operation near the specified maximum ratings or ambient conditions may
require shorter maintenance intervals for certain components. Consult your local ABB Service
representative for additional maintenance recommendations.
￭ Descriptions of symbols
DescriptionAction
Inspection (visual inspection and maintenance action if needed)I
Performance of on/off-site work (commissioning, tests, measurements or other work)P
ReplacementR
￭ Recommended annual maintenance actions by the user
ABB recommends these annual inspections to ensure the highest reliability and optimum
performance.
11
Maintenance 161
To Next Page
Loading...
