EasyManua.ls Logo

ABB ACS880-07 Series - Lifting the cabinet with crane

ABB ACS880-07 Series
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lifting the cabinet with crane
WARNING!
Incorrect lifting can cause danger or damage. Obey the local laws and regulations
applicable to lifting, such as requirements for planning the lift, for capacity and
condition of lifting equipment, and for training of personnel.
Lift the drive cabinet by its designated lifting eyes. The lifting eyes can be removed after the
cabinet is in its final position, but their mounting holes must be blocked to retain the degree
of protection.
Max. 30°
IP54, UL Type 12IP22, IP42 (option +B054)
Option +B055UL Type 1, UL Type 1 Filtered (option +B054)
Note: The minimum allowed height of the lifting slings
is 2 meters (6.7 ft).
Lifting lugs
Certificate of conformity
The certificate is available in ABB Library at www.abb.com/drives/documents (document
number 3AXD10001061361).
Mechanical installation 71
10

Table of Contents

Related product manuals