￭ Replacing the cabinet fans (frames R6 to R9)
1.
Stop the drive and do the steps in section Electrical safety precautions (page 18) before
you start the work.
2.
For removing the fan mounting plate, see section Replacing the drive module (frames
R6 to R8) (page 176) (steps 1 to 3 and 13) or section Replacing the drive module (frame
R9) on page 181 (steps 1, 9 and 10). For frame R9 with option +C129, see also below:
3. Remove the fan from the mounting plate.
4. Install the new fan in reverse order.
Maintenance 167
To Next Page
Loading...
