Introduction to the manual
Contents of this chapter
This chapter describes the manual. It contains a flowchart of steps in checking the delivery,
installing and starting up the drive. The flowchart refers to chapters/sections in this manual
and to other manuals.
Target audience
This manual is intended for people who plan the installation, install, start up and do
maintenance work on the drive, or create instructions for the end user of the drive concerning
the installation and maintenance of the drive.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
Categorization by frame size and option code
The frame size identifies information which concerns only a certain frame size of the drive.
The frame size is shown on the type designation label. All frame sizes are listed in the
technical data.
The option code (+A123) identifies information which concerns only a certain optional
selection. The options included in the drive are listed on the type designation label.
2
Introduction to the manual 25
To Next Page
Loading...
