DescriptionCode
Starter for auxiliary motor fan, trip limit 4 … 6.3 AM603
Starter for auxiliary motor fan, trip limit 6.3 … 10 AM604
Starter for auxiliary motor fan, trip limit 10…16 AM605
Winder control programN5000
Crane control programN5050
Winch control programN5100
PCP (Progressive Cavity Pump) control programN5200
Test bench control programN5300
Cooling tower control programN5350
Override control programN5450
ESP (Electrical Submersible Pump) control programN5600
Position control programN5700
Control program for synchronous reluctance motors (SynRM)N7502
IEC 61131-3 application programmabilityN8010
High speed (> 598 Hz) licenseN8200
CustomizedP902
Extended warranty (30 months from delivery or 24 months from commissioning)P904
Extended warranty (42 months from delivery or 36 months from commissioning)P909
Extended warranty (66 months from delivery or 60 months from commissioning)P911
Seaworthy packagingP912
Special color (RAL Classic)P913
Safety data calculation and validation for tailored safety functionsP947
Customized extended warrantyP948
Country of origin: FinlandP952
Special color (other than RAL Classic)P966
Prevention of unexpected start-up with FSO-xx safety functions module, by activating the Safe
torque off function
Q950
Emergency stop (category 0) with safety relays, by opening the main breaker/contactorQ951
Emergency stop (category 1) with safety relays, by opening the main breaker/contactorQ952
Earth fault monitoring for IT (ungrounded) systemsQ954
Prevention of unexpected start-up with safety relays, by activating the Safe torque off functionQ957
Emergency stop (category 0) with safety relays, by activating the Safe torque off functionQ963
Emergency stop (category 1) with safety relays, by activating the Safe torque off functionQ964
Safely-limited speed with FSO-21 and encoderQ965
ATEX-certified safe disconnection functionQ971
FSO-21 safety functions moduleQ972
FSO-12 safety functions moduleQ973
Emergency stop (configurable for category 0 or 1) with FSO-xx safety functions module, by opening
the main breaker/contactor
Q978
Emergency stop (configurable for category 0 or 1) with FSO-xx safety functions module, by activating
the Safe torque off function
Q979
PROFIsafe with FSO-xx safety functions module and FPNO-21 Ethernet adapter moduleQ982
FSPS-21 PROFIsafe safety functions moduleQ986
62 Operation principle and hardware description
To Next Page
Loading...
