ABB ControlIT 53MC5000 User Manual

Table 5-9. Controller Modules (CON0-3)
Title Definition Atom CON0 CON1 CON2 CON3 Default
Remote Setpoint Enable When this parameter is set to a
1
, the modified
Remote Setpoint is allowed to become the
setpoint value of the setpoint generator if the
Remote Switch (SWR) is set to a
1
by the R/L
push button or user program (F-TRAN, FCIM,
or FCS wire list). See also remote setpoint
modifiers Remote Setpoint Bias (B1) and
Remote Setpoint Ratio (K1).
RE
(0-3)
L115 L139 L163 L187 0
Setpoint Track Switch See Setpoint Track Enable (STE). SWSPT
(0-3)
L116 L140 L164 L188 0
Output Track Switch See Output Track Enable (OTE). SWOVT
(0-3)
L117 L141 L165 L189 0
SP Track Enable When this parameter is configured to a
1
, the
controller’s setpoint can be forced to match
Setpoint Track Value (STV) whenever the
Setpoint Track Switch (SWSPT) is a
0
. Based
on the input sources for STP and SWSPT,
process variable tracking, setpoint fallback,
and setpoint override, as well as other setpoint
schemes can be implemented in the local
setpoint generator.
STE
(0-3)
L118 L142 L166 L190 0
Output Track Enable When this parameter is configured to a
1
, the
controller’s setpoint can be forced to match
Output Track Value (OTV) whenever the
Output Track Switch (SWOVT) is a
0
. Based
on the input sources for OTV and SWOVT,
output fallback, and output override, as well as
other output schemes can be implemented in
the auto/manual switch generator.
OTE
(0-3)
L119 L143 L167 L191 0
5 of 9
5-18
53MC5000 Process Control Station

ABB ControlIT 53MC5000 Specifications

General

Brand	ABB
Model	ControlIT 53MC5000
Category	Controller
Language	English