ABB ECA06 - Page 130

3.6 Setting the Configuration Chapter 3: Configuration
130 493-0736-11 (6-2)
Advanced Set Point Ramp Example
In the example below the Time and Va lu e parameters are set according to the table
below.
Note: Each Time parameter is relative to the previous Time parameter. All Val ue
parameters are absolute.
Table 89 Advanced Set Point Ramp Example.
Name Value
StartValue 0.0
Time1 2
Value1 2 0
Time2 2
Value2 3 0
Time3 1
Value3 6 0
Time4 2
Value4 7 0
Time5 5
Value5 5 0