2.4 Electrical Installation Chapter 2: Installation
32 493-0736-11 (6-2)
Analog Inputs
AI1 to AI5 have their positive and negative poles connected as shown in
Figure 13. Cable screens must be connected to the chassis ground using lug
connectors. Connection to the chassis ground is available at the four screws at the
rear panel.
Figures 14 to 17 give examples of how to connect different types of analog input
to the controller.
Note: For voltage input the appropriate jumper must be removed.
Figure 13 I/O Signal Wiring.
+
-
+
-
+
-
+
-
+
-
J1 J2
z32
AI1
AI2
AI3
AI4
AI5
z30
d32
d30
z28
z26
d28
d26
z24
z22
d24
signal ground
d16
d2
z2
J3 J4
J5 J6
J7 J8
J9 J10
To Next Page
Loading...
