Chapter 3: Configuration 3.1 Configuring the Process Value
493-0736-11 (6-2) 45
4 If you enter the correct password you have read/write access to the
Configuration mode.
5 Press the OK key.
6 Repeatedly press the Up or Down key until you reach the Operator Block.
7 Press the OK key to enter the Operator Block.
Note: If the unit is an ECA600 the following is displayed:
Press the OK key to proceed.
Config 600 001.05-00
Enter Code
6845
Cancel
OK
Config 600 001.05-00
Code correct
Full access
Return
OK
Config 600 001.05-00
Operator
Return
OK
Operator
PID1
Return
OK
To Next Page
Loading...
