ABB ECA06 - Page 46

3.1 Configuring the Process Value Chapter 3: Configuration
46 493-0736-11 (6-2)
8 Repeatedly press the Up or Down key until you reach the Process Value
section.
9 Press the OK key to enter the Process Value section.
10 The first parameter displayed is NumberOfDecimals. Press the OK key to
choose to edit this parameter.
11 Press the Up or Down key to scroll through the values 0–4 displayed on the
third line of the display.
12 When the number of decimal places shown is 2 press the OK key.
13 Press the Up or Down key until the second line of the display shows
MinValue.
14 Press the OK key.
15 Press the Up or Down key to scroll through the range of values allowed for
MinValue.
PID1
Process Value
Return
OK
Process Value
NumberOfDecimals
Return
OK
Process Value
NumberOfDecimals
2
Cancel
OK
Process Value
MinValue
Return
OK