3.6 Setting the Configuration Chapter 3: Configuration
84 493-0736-11 (6-2)
The output, Status, is True whenever one or more of the inputs are True.
Otherwise Status is False.
Table 33 Or Inputs.
Table 34 Or Outputs.
Note: If an input is not connected it represents the value False in the calculation.
Xor
Status = Signal1 XOR Signal2
The Xor function has two digital inputs, Signal1 and Signal2, and one digital
output, Status. The function is summarised in the table below.
Inputs
Name Connection
Signal1 Off, Digital
Signal2 Off, Digital
Signal3 Off, Digital
Signal4 Off, Digital
Outputs
Name Type
Status Digital
Available in
ECA06 ECA60 ECA600 EMA60
- XXX
Signal1
Signal2
Status
Xor
To Next Page
Loading...
