3 Maintenance
3.6.1. Cleaning of Robot Standard and Wash Down
3HAC030005-001 Revision: -106
© Copyright 2006 ABB. All rights reserved.
Wash Down Cleaning
Sensitive spots for direct flushing.
xx0800000005
NOTE!
This applies for IRB 360 WD, and IRB 360 WDS, versions.
DANGER!
Always read the instructions following the high pressure washer and the detergents used in
the cleaning procedure.
A Base cover gasket
B Brake release button
C Transmission cover gasket
D Axis 4 sealing ring
E Movable plate
F Upper arm sealing rings
Action Note
1. Flush with water max. 60°C, low
pressure, see Figure for
sensitive points.
Continued
Continues on next page
To Next Page
Loading...
