4 Repair
4.3.7. Replacement of Telescopic Shaft
1353HAC030005-001 Revision: -
© Copyright 2006 ABB. All rights reserved.
2. Refit the upper Set
screw use locking
liquid (Loctite 243).
xx0700000613
TIP!
Use a 90° angled bit holder.
Tightening Torque 7 Nm
3. Refit the Movable Plate
use locking liquid
(Loctite 243).
Described in section Replacement of Movable Plate on page
130
4. Refit the Parallel Arms. Described in section Replacement of Parallel Arms on page
120
Action Note
Continued
To Next Page
Loading...
