2 Installation and Commissioning
2.4.7. Fitting equipment on robot
553HAC030005-001 Revision: -
© Copyright 2006 ABB. All rights reserved.
Mounting Equipment R1/4”
xx0700000490
CAUTION!
Never drill a hole in the manipulator without first consulting maintenance staff or the design
department at ABB.
Open end spanner 22 mm
Equipment Spare part no. Note
A Mounting Flange
B Tool (Fitting R1/4”)
C Open-end spanner 22 mm
Action Note
1. Attach the tool to the mounting flange. Fitting R1/4”
Continued
Continues on next page
To Next Page
Loading...
