2 Installation and Commissioning
2.4.7. Fitting equipment on robot
573HAC030005-001 Revision: -
© Copyright 2006 ABB. All rights reserved.
Attachment screws
2.
CAUTION!
Always use an open-end spanner 22 mm or similar
on the mounting flange, when tightening.
Action Note
Attachments Note
Suitable screws, lightly lubricated: M4 (Length depending on tool)
Suitable washer.
Tightening torque. See section Screw joints on page 114.
Continued
To Next Page
Loading...
