NoteAction
The figure shows Other design than Type
C. The principle of securing the bracket
on Type C is the same.
xx0900000018
Secure the bracket on its attachment screws
in the base.
Tip
Perform this in the following order:
• Put the attachment screws in the
holes but do not tighten them yet (if
they have been removed earlier).
• Place the bracket on the attachment
screws.
• Secure the bracket with its attach-
ment screws.
4
Parts:
• A: Base
• B: Attachment screws (2 pcs)
• C: Bracket
xx0900000015
Refit the earth cables.5
Parts:
• A: Earth
• B: Distance screws
Connect the contacts on the SMB unit:
• R1.SMB1-2
• R1.SMB3-6
• R2.SMB
6
How to refit the SMB unit is described in
section:
• Refitting the SMB unit on page 226
Refit the SMB unit.7
Continues on next page
3HAC033453-001 Revision: H 215
© Copyright 2009-2013 ABB. All rights reserved.
4 Repair
4.3.2 Refitting the complete cable harness
Continued
To Next Page
Loading...
