NoteAction
For robots with protection class
IP30 (option 3350-300)
Refit the SMB cover assembly.2
Secure the SMB cover to the base with the
screws.
3
Screws: Hex socket head cap
screw M4x10 12.9 Lafre
2C2B/FC6.9 (6 pcs)
Tightening torque: 2.6 Nm
xx2300000489
Refitting the base plate/ rear plate
NoteAction
Apply grease to the internal harness, cover all
moving area of the harness.
1
Continues on next page
Product manual - IRB 930 435
3HAC086009-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.7.1 Replacing the axis-1 motor sub-assembly
Continued
To Next Page
Loading...
